rough ride

Hey everyone i have a 1940 pontiac 2 door sedan. When I bought it was already "customized" to be accurate its a rat which i don't mind, obviously I bought it. Anyway its a rough ride rattles a lot I know its what a rat is suppose to do but id like to make it a little quieter and not so shaky. I was thinking of adding in some body mounts seeing as the body is bolted & welded to the frame. Would adding in rubber some other type of padding help? What kind of reinforcement would i need to do? I'm a bit of a novice to hot rods builds, but I am aware of what this job would involve. Any advice is appreciated.

WOW, I guess that's one way to lower the car body on a budget. I think the first thing I would do is to mount some radials and see if that makes the car tolerable.

Shoot us some detailed pictures of some of the areas like suspension, frame, how the body is currently mounted, etc. Hard to make a recommendation with so little info. It could be a variety of things causing the problem, from bad suspension to improper construction, etc.

Don

from what the guy i bought it from said it has a camaro front clip but i think the front coils were cut down it does already have radial tires on it ill take some pictures tonight when the temp drops below 110

Quote:

---

Originally Posted by croom7401

from what the guy i bought it from said it has a camaro front clip but i think the front coils were cut down it does already have radial tires on it ill take some pictures tonight when the temp drops below 110

---

There's one thing, if the front coils have been cut it will raise the spring rate making for a harsher ride....

Quote:

---

Originally Posted by croom7401

from what the guy i bought it from said it has a camaro front clip but i think the front coils were cut down it does already have radial tires on it ill take some pictures tonight when the temp drops below 110

---

I see this over and over again and wonder what is going through the minds of those who do clip swaps. If you use fixtures to set the control arms at stock height relative to the clip and position the body/frame at the ride height where you want it to end up, you can weld the clip in and have factory geometry with stock springs and everything is lovely.

Oh, and if you think it's gonna drop below 110, then you've been out in the sun too long....:LOL:

If you have coils now ,air bags are cheap and install rather nice in thier place ,plus you can play with ride height{spacers} ,then get it aligned properly.Rubber body mounts help too ,take some pics for all to see.......
There are good suspention guys here.