Thread: cheap body bushings
Results 1 to 5 of 5
LinkBack URL
About LinkBacks-
09-24-2008 10:32 PM #1
CHR Member
- Join Date
- Sep 2005
- Location
- Hamilton
- Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
- Posts
- 3,900
cheap body bushings
What would be the absolute cheapest way to get some generic body bushings for a custom build?.
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-25-2008 01:42 AM #2
Banned
- Join Date
- Aug 2008
- Location
- Gulfcoast Salvage 34224
- Car Year, Make, Model: The thing in the avatar
- Posts
- 517
http://cgi.ebay.com/ebaymotors/57-Ch...=p4506.c0.m245 there are a lot of them on ebay
-
09-25-2008 02:06 AM #3
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
We buy ours at a 4 x 4 shop, they are made for Jeeps, and are about 2 inches in diameter x 1/2 inch thick. Made of semi hard rubber with a 1/2 inch hole in the middle, and cost only like a buck or two each. Nice part is, they are small and flat on both sides, so you just slip them in and run a bolt through them.
Don
-
09-25-2008 02:13 AM #4
CHR Member
- Join Date
- Jun 2008
- Location
- Belle Fourche
- Posts
- 521
Hockey pucks
-
09-25-2008 08:55 PM #5
CHR Member
- Join Date
- Apr 2007
- Location
- Austin
- Car Year, Make, Model: 1966 Mustang Fastback
- Posts
- 396
Boat trailer rollers, 2" diameter, cut them any thickness you want, band saw works great for cutting.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?