What would be the absolute cheapest way to get some generic body bushings for a custom build?
Printable View
What would be the absolute cheapest way to get some generic body bushings for a custom build?
http://cgi.ebay.com/ebaymotors/57-Ch...=p4506.c0.m245 there are a lot of them on ebay
We buy ours at a 4 x 4 shop, they are made for Jeeps, and are about 2 inches in diameter x 1/2 inch thick. Made of semi hard rubber with a 1/2 inch hole in the middle, and cost only like a buck or two each. Nice part is, they are small and flat on both sides, so you just slip them in and run a bolt through them.
Don
Hockey pucks
Boat trailer rollers, 2" diameter, cut them any thickness you want, band saw works great for cutting.