Thread: cheap body bushings
Results 1 to 5 of 5
LinkBack URL
About LinkBacksHybrid View
-
09-24-2008 10:32 PM #1
CHR Member
- Join Date
- Sep 2005
- Location
- Hamilton
- Car Year, Make, Model: 69 nomad, 73 charger, 74 vega
- Posts
- 3,900
cheap body bushings
What would be the absolute cheapest way to get some generic body bushings for a custom build?.
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
09-25-2008 01:42 AM #2
Banned
- Join Date
- Aug 2008
- Location
- Gulfcoast Salvage 34224
- Car Year, Make, Model: The thing in the avatar
- Posts
- 517
http://cgi.ebay.com/ebaymotors/57-Ch...=p4506.c0.m245 there are a lot of them on ebay
-
09-25-2008 02:06 AM #3
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
We buy ours at a 4 x 4 shop, they are made for Jeeps, and are about 2 inches in diameter x 1/2 inch thick. Made of semi hard rubber with a 1/2 inch hole in the middle, and cost only like a buck or two each. Nice part is, they are small and flat on both sides, so you just slip them in and run a bolt through them.
Don
-
09-25-2008 02:13 AM #4
CHR Member
- Join Date
- Jun 2008
- Location
- Belle Fourche
- Posts
- 521
Hockey pucks
-
09-25-2008 08:55 PM #5
CHR Member
- Join Date
- Apr 2007
- Location
- Austin
- Car Year, Make, Model: 1966 Mustang Fastback
- Posts
- 396
Boat trailer rollers, 2" diameter, cut them any thickness you want, band saw works great for cutting.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
We Lost a Good One