Josh, what measurements do you need? We have the same complete body sitting in our loft and I can measure it for you. Just tell me where.
Don
Printable View
Josh, what measurements do you need? We have the same complete body sitting in our loft and I can measure it for you. Just tell me where.
Don
at the outside corners of the main subrails, and x members points, so I can get the body in the proper shape
I just need to get things close, and for the life of me cant find any info out on the web.
thanks Don
Josh
Sorry Josh, not following exactly from where to where you mean. Make a simple drawing if possible and post it as I am pretty dumb. :o
Don
my fault, I'm not a good describer, and was being lazy
hopefully this clears things up
thanks
Maybe you could use the frame dimensions for the floor pan,,
http://www.wescottsauto.com/WebCatal...ram1928-31.pdf
A little late today but tomorrow I can get them for you .
Mo better Josh. :D Between Bobby and I we should be able to get the dimensions you want. I'll stop at the shop tomorrow after work.
Don
thank you both
Josh
Being my car has its rear seat frame in it I can only access B-C-D for you
B = 37 1/8
C = 41 3/8
D = 41 1/2
thanks Bobby D, that'll get me going!!!
oops double
That was the center of floor rail at 2 inches in width the d area was only 1 1/2 inches due to body so center was 3/4 inch .
You are welcome let me know if I can help any more . Its only a few feet away .
Been werking a hour here and there after the shop closes this past week... here's and update
Was going to fix the old fire wall, but then I had the opportunity to do werk for a brookville dealer, and struck up a trade
got a new firewall, toe boards, and front x-member for the frame for some blasting and Powder coating.... love me some trading!!!
started rebuilding the doors while I decide what to do about the cowl sides
Lookin good, man. A lot of people wouldn't have tried to tackle that body but you're proving it can be brought back to life.
Geez Josh, I am so sorry. I forgot all about getting you the measurements until I saw this tonight. Old age CRS.:o If you still need any of them let me know and I promise to write myself a note.
Looking good by the way.
Don