52 GMC interior finally about complete

Finally have the seats and interior parts installed, and about ready to call this one complete. Modified the original bench seat to a tilt-forward design with built-in arm rest...it turned out pretty good.

http://talk.classicparts.com/photos/...edium/0381.jpg
http://talk.classicparts.com/photos/...edium/0371.jpg
http://talk.classicparts.com/photos/...medium/034.jpg

(the black line you see in the center is the power cord for the navigator I just hooked up for this trip. It plugs into one of the power outlets on the front of the seat frame...)

Had a friend cut some labels for the air controls, and a "Midnight Rose" to put on the dash.

http://talk.classicparts.com/photos/...medium/033.jpg
http://talk.classicparts.com/photos/...medium/036.jpg

Here's a shot of how the seat tilts forward...latches with a rotary latch on each side, linked together with a rod so you can trip both from either side...
http://talk.classicparts.com/photos/...medium/040.jpg
http://talk.classicparts.com/photos/...medium/042.jpg

Did a polished aluminum trim strip to cover where the carpet meets the paint going up the back wall...it seemed to turn out pretty good.
http://talk.classicparts.com/photos/...medium/041.jpg

We're due to launch outta here in 36 hours for a week on the road, so was cutting this pretty close...danged near ended up riding a six by six block of wood on our trip!

Very nice interior. Enjoy your trip. Take care.