Thread: Meller's "Last" Hoorah - '62 Fairlane

Tweet

Mello have you looked at these, they are also made by R&M

or maybe something like these?

Originally Posted by stovens

Mello have you looked at these, they are also made by R&M

or maybe something like these?

I have and they mount similar to what Mike posted in #244 but I'm wanting the other look I mentioned.

I'll keep a look out

thanks, man, I think I've worn out my browser - - - - so far I've only come up with using two different brands from 2 different store and neither has red ends - - - life is teed'jous ain't it

One more and I'll stop cluttering up the Forum with this nonsense !
What I'm hoping to find is like 2 sets of these in red with 4, 3, 2 &1 ends.

Moroso Four Hole Spark Plug Wire Loom Kit - Red - 7-8mm
http://www.summitracing.com/parts/su...FU7hQgodkS0AbA
Here they are in red
http://www.ebay.com/itm/Spectre-Spar...-/380663773328
https://www.rebelperformance.com/ign...eparators.html

GMTA - - hahahaha - - I just ordered a set like those Spectre from Jegs so now I'll see what it costs to ship the Moroso Four Hole set - - - thanks, Pal

OOPS spoke too soon they want $16+ to ship a $7 item which brings the total up to almost $24 so I had to pass on them.

I think I can find the 4 position locally in the 2 bracket sets so that's what I'll do while I'm waiting on Jegs to ship the rest.

TA

The Red 4 Hole is Moroso 97835, and you can source them two to a card from most of the players. On Jegs it's a Moroso #710 97835 for $5.99. You might see if you can add it to your order......

Originally Posted by rspears

The Red 4 Hole is Moroso 97835, and you can source them two to a card from most of the players. On Jegs it's a Moroso #710 97835 for $5.99. You might see if you can add it to your order......

Roger, this is what Jegs shows me under that number
97835 - JEGS High Performance

None of the players I sourced have them except for the link that Stovens posted but they wanted too much ($16)to ship them.

I actually found the other 3 & 2 ended red ones thru Amazon.com and ordered them there.

Originally Posted by MelloYello

Roger, this is what Jegs shows me under that number
97835 - JEGS High Performance

None of the players I sourced have them except for the link that Stovens posted but they wanted too much ($16)to ship them.

I actually found the other 3 & 2 ended red ones thru Amazon.com and ordered them there.

Doesn't really matter what the picture shows, Em. The words tell the story - Red, 4 hole, two to a card and you're done. Call them and talk to the guy who answers.

Dang, no wonder I couldn't find them - - - - oh well, got 2 orders coming from JEGS but one's thru Amazon so they are ordered and hopefully this is done now.

thanks, Gents,
Em

Em

After reading the thread on radiator recovery by 36sedan, I want you to go back and read my post #2114 on 6-18----------

Originally Posted by jerry clayton

Em
After reading the thread on radiator recovery by 36sedan, I want you to go back and read my post #2114 on 6-18----------

Don't know if that radiator will stand too much retained pressure but I'll sure consider all of this information when the time comes.

thanks Jerry, have a good'un,
Em

Originally Posted by MelloYello

Don't know if that radiator will stand too much retained pressure but I'll sure consider all of this information when the time comes.

thanks Jerry, have a good'un,
Em

Em,
The key is that you're removing air from the system, and if you keep the same pressure range on the cap you'll still help yourself. Running an air cushion on top doesn't change the system pressure - it's just a matter of whether it's pressurizing a big air bubble or a full charge of coolant which gives you more volume for heat transfer and less corrosion.

Old wires off - - - 2/3 of the looms mounted and now I'm waiting on the remaining 2 four slotted looms and my friend to drop off his crimping tool. Then it will be AH and elbows and a soldering iron for a couple of days since it's so daggone hot right now. Cleaned up some loose wires also and I need to get some convaluted tubing to put all of them in. It will never be a show car but at least you can see where things are and their not lying on the manifolds or rubbing together.
(was gonna put a pic here but my Photobucket is taking a $#@%$#)

Hope everyone has a safe and blessed 4th of July - - - - remember the "reason for the season" as they say.

Em