1957 GMC Stepside Project Truck Price Varies on Package Deal

Attachment 57868Attachment 57869Attachment 57870Attachment 57871Attachment 57872


Not much left to finish off this cool project truck...

1957 GMC Stepside rat rod project. rebuilt rearend (by a reputable pro shop), shelby gt 500 wheels (as pictured without the bed), tires about 85% tread life, original refinished wood salvaged from a 1950 chevy panel truck (has yet to be cut down to size as it is much longer than the ones used for the truck) brand new gauges (full cluster), 1957-1963 mercedes 190 seats, custom built solid steel dash, custom side step (driver side finished only), Theres more parts that go with; front and rear bumpers, bed step and more, only thing i don't have is the grill cause i was designing my own.

I have the metal set aside to do the passenger side, driver side rust was cut out and patched in with solid sheet metal, new vent windows (driver side installed) and new windshield wiper motor (electric) from LMC truck.

I Logged 50 hours in just the dash portion of the build alone, and a few hundred manhours in the sheetmetal work cutting out the old bad sections and forming in new ones. I have an inventory of over 250 pictures documenting everything done so far so if theres something you don't see please feel free to ask.

Needs: motor and tranny?? (depends on how you want to buy it), fuel cell or use the stock one, battery, rear shocks, engine crossmember welded or bolted in, motor and trans are in it but not mounted permanant, front suspension finished off on passenger side, sheet metal work done on the passenger side (patches), cab corner front, brakes, for the major stuff, few minor things here n there.

I had envisioned this truck as a blend of 1st series and 2nd series which is why I used parts off a 1950 Chevy Panel truck to incorporate into the redesign of the truck. It still needs a few more things to complete the look or finish it how you envision it. I did include some pics of the sheetmetal that was replaced to give you a better idea of the direction I was going.

Truck carries a clean and clear title which I will sign over with a full bill of sale contract to the new owner. I will also provide all the pictures of during the build on disc for the new owner to look over roughly 250 pictures in total along with a build sheet for the final stages which I put together to use as a reference. There is a motor and tranny for sale if your in need. Contact me for details.

3 Different Way to Buy
Asking $3250 For the truck without the Engine and Tranny
Asking $4200 for just the Engine and Tranny Combo (motor specs below)
Asking $6500 w/ Engine and Tranny

Yes Price is Negotiable, No Lowballers will be responded to

Engine
rebuilt 327 with serious investment and attention to detail. comp cams 495 cam, 4130 forged steel crank, melling high volume oil pump, heads punched to 2.02 with comp cam valves, lifters, retainers, dual stage springs and 1.6 ratio rockers, edelbrock intake, weiand aluminum water pump, arp head kit, felpro gaskets, MSD distributor, new alternator, cloyes gear drive, brand new Aluminum radiator in the box, the works, over 5K invested between machining and new parts, (sorry reciepts lost in the move but welcome to inspect the motor for yourself) Muncie 4 speed (1968 Version which came in only the SS Camaro, Nova, Chevelle and the Corvette according to the numbers), stage 2 centerforce clutch

Truck is located in Kitsap County Wa, Again I got tons of pics that show everything on the truck as she sits, as she got worked on and the finshed work, only get to post 8 at a time so feel free to ask.