Thread: bold patern 392
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
02-05-2006 03:57 AM #1
CHR Member
- Join Date
- Oct 2005
- Location
- vledder the netherlands
- Car Year, Make, Model: 1957 imperial
- Posts
- 16
bold patern 392
I need the exact bold patern for the 392
I must make a adaptorplate to get the 4L80E behind it.
So what I need is a exact drawing of the rear of the 392
with the exact locations of all bold holes
pins and center of crank location.
I canT find it on the internet.
Regards
Remco
The Netherlands
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-05-2006 07:42 AM #2
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
I'm sure these guys know, but I don't know if they'll tell you....
http://www.transmissionadapters.com/index.htmPLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
02-05-2006 07:50 AM #3
CHR Member
- Join Date
- Mar 2003
- Location
- SW Arizona
- Car Year, Make, Model: 68 Ply Valiant, 83 El Camino
- Posts
- 3,856
Or check with http://www.hothemiheads.com and see what they have on the shelf.
It's usually more complicated than just the adaptor, and involves a flex plate/flywheel that also must function with the starter your going to be using.I've NEVER seen a car come from the factory that couldn't be improved..... 
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
You're welcome Mike, glad it worked out for you. Roger, it's taken a few years but my inventory of excess parts has shrunk a fair bit from 1 1/2 garage stalls to about an eight by eight space. ...
1968 Plymouth Valiant 1st Gen HEMI