http://www.kleanstrip.com/Quote:
Originally Posted by gassersrule_196
search aircraft remover
Printable View
http://www.kleanstrip.com/Quote:
Originally Posted by gassersrule_196
search aircraft remover
Oil Eater ,is pretty good on oil,it makes yer hands dry as can be ,in about 10 seconds.....:LOL:
Its also bio degradable .
some of the under coating is not all tar or oil base they are a rubber type .the air craft stripper maybe over kill but it will make short work of it and take off any seam sealer to
Ok
"The weather is here I wish you were beautifull....but don't go away" Jimmy Buffet
Any way seriously I am buying a used air compressor that will meet my cfm needs for a sand blaster. I'm looking to pick up a blaster from Harbor Freight to basically clean up the frame and underside of some truck parts, but will shy away from the sheet metal for all the reasons stated about metal fatigue. They sell Walnut shell media in 12 grit and 24 grit. So what size blaster and what grit walnut to remove rust from frame and leaf springs? I'm looking to keep costs down. Thanks, Steve.
:whacked: I'm about to take off to buy a used 20 gallon air compressor, and a small sand blaster. Harbor freight has quite a few blasters. I'm looking to use walnut as a media, any recogmendations, I have to leave in an hour. Thanks, Steve.
The Purple stuff is called Purple Power and we have used it for years! Aircraft stripper works good too you just need to be a little more careful!