Thread: Base coat finishing
Results 1 to 2 of 2
LinkBack URL
About LinkBacksHybrid View
-
07-16-2004 05:26 PM #1
CHR Member
- Join Date
- Mar 2003
- Location
- San Jose
- Car Year, Make, Model: 35 Chevy coupe, 66 Mustang
- Posts
- 12
Base coat finishing
i just finished shooting my base white and blue stripes. i have been 1500ing lightly between each coat but it leaves slighlty visible scrathes. do i need to go to a higher grit or use some sort of compound on it, or will the clear hide all this?
-
07-16-2004 05:32 PM #2
CHR Member
- Join Date
- Mar 2002
- Location
- Wichita
- Car Year, Make, Model: 37 Ford tudor humpback
- Posts
- 695
There is no reason to sand between base coats, spray your 3-4 coats and clear.
Base wasnt made to be sanded between each application, if you preped sanded good on final sanding , just tac, seal and spray the base and then the clear.
SprayTech
Oh and clear will only MAGNAFY the scratches !!!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
We Lost a Good One