Thread: u bolts or straps
Hybrid View
-
02-18-2005 02:49 PM #1
u bolts or straps
this question is probably fundamental knowledge, but I don't know and people at auto parts stores don't seem to know either. I got a driveshaft made and I'm looking for the piece to connect the rear u-joint to my 1330 yoke on the ford 9"diff. I took the measurements off the yoke for the guys to make the shaft (i.e.-distance between locating tabs, cap diameter). These were 3.625" and 1.125".
Should I be using u bolts or straps? Is this an option, or will only one work?
-
02-18-2005 03:32 PM #2
Generally not an option. If the yoke has threaded holes it's set up for straps, if they are just drilled it's set up for U Bolts.I've NEVER seen a car come from the factory that couldn't be improved.....
-
02-18-2005 05:59 PM #3
ok, they are just holes.
now I know what I'm looking for
-
02-18-2005 06:20 PM #4
Get U-bolts for a 1330 U-joint. All 1330s have the same dimensions.Jack
Gone to Texas
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?