Thread: Wheel Fitting Problems!
-
06-28-2005 08:53 PM #1
Wheel Fitting Problems!
Today I went to the wheel shop to order my new wheels and tires for my 66. Well I have a problem here. My front hub doesn't work with American Racing Vintage wheels because the front end is from a 76 F100 and is a disk brake setup so the hub is pretty big and sticks out about 2 1/2 inches. The guy said I need the pull through caps like you see on off road wheels, etc. So basically I can only use wheels like this...
http://centerlinewheels.com/wheels_d...w_id=1&sw_id=9
Or with the cap that sticks out quite a bit.
I dont like none of those new style wheels or nothing, I am stuck on the 5 spoked look or such. Any idea's here? Any other brands to try besides Centerline, Eagle, Weld or Cragar? Thanks for any info here, I am stuck on this choice and already ordered my tires for 15X7 in front and 15X8 in rear and I have a 5X5.5 lug pattern.www.streamlineautocare.com
If you wan't something done right, then you have to do it yourself!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Sorry for your loss of friend Mike McGee, Shine. Great trans men are few and far between, it seems. Sadly, Mike Frade was only 66 and had been talking about retirement for ten years that I know...
We Lost a Good One