new parts and cam ?????

CCA-31-242-3 Competition Cams Xtreme Energy Camshafts
CCA-3120 Competition Cams Timing Chain Sets
CCA-832-16 Competition Cams Hydraulic Lifters
CRN-11746-16 Crane Energizer Roller Rocker Arm Sets
EDL-60229 Edelbrock Performer/Performer RPM Street Cylinder
EDL-7121 Edelbrock Performer RPM Intake Manifolds
EDL-9632 Edelbrock Hardened Steel Pushrods
FPP-10111 Fel-Pro Performance Head Gaskets
FPP-1250 Fel-Pro Performance Intake Manifold Gasket Sets
FPP-1415 Fel-Pro Performance Exhaust Header Gasket Sets



hey guys i just got all these parts i was wondering if the cam will be ok and not hit anything on my SBF289 thank fot the help guys :3dSMILE: :3dSMILE:

lol. so that mean ever thing will be ok and do u have any idea what kinda of hp i shoul dbe getting out of this thing its a 289, with edl rpm heads,rpm intake,that cam ,1.6 roller rockers,holly650 carb

Hit man, to be safe, if you have any doubt at all, use the old timer's trick. Put a thin amount of clay on the top of the pistons (should do all eight just in case), bolt on the heads with push rods installed. Hand turn (only) the engine so that all the valves have had a chance to go through an open and close cycle. Take the heads off and inspect for any valve face imprints in the clay. If you do have a problem you may get away with switching out the 1.6 rockers, just depends if, and how much interference.

sweet that a reall good idea thank a lot