I found an Auto trans a TH 350 to sit behind my sb350 What type of shifter mech should I be looking at as the Org. truck had a 3 on the tree!
Printable View
I found an Auto trans a TH 350 to sit behind my sb350 What type of shifter mech should I be looking at as the Org. truck had a 3 on the tree!
I'm guess its going in a truck??? If you want it on the column just buy a automatic column and the linkage for it most salvage yards or Ebay will fill your needs. If you want it on the floor there are MANY after market shifters it would depend on your tastes and needs.
I would go with the Gennie Center Mount on your 350. Check out the following links. The Rod Factory can provide you with everything you will need.
The manufacture "Gennie Shifter Products" does not sell retail so you need to pick it up from a speed shop or custom builder. I just purchased one for my 29.
http://www.rodfactory.com/NewFiles/shifters.html
http://www.hotrodhotline.com/gennie/#shifters
:toocool:
I would also use a factory automatic column shift setup. Not all TH350s work with floor shift and most floor shifter's linkage gets in the way of headers.