Printable View
This would have been off of my 49 plymouth. It was in the trunk when I bought it. I have no idea what it is, All I know is I don't need it for my build so I want to sell it on Ebay, but I have no idea what it is,
http://bis.midco.net/skarhotrod/Ebayselling/unknown.JPG
Thanks
Tim
Looks like one of those diurnal marzelvanes from a reciprocating dingle arm to me. Too bad it has been damaged by di-hydrogen monoxide.
That would be my guess, too.........but they are more commonly referred to as a "skim adjuster".
I don't weather to believe you or not HotRodPaint. I have never heard of a "skim adjuster". If that is what it is, what is the real name.
I know this is a stupid question, but its a part I am not going to use, and rather than throw it away I want to sell it to someone who can use it for a restore, and can't do that without knowing a little something about it.
Thanks guys
Tim
hat would be my guess, too.........but they are more commonly referred to as a "skim adjuster".
But what would a skim adjuster be doing in the trunk of a Plymouth? The only ones I have ever seen were for Chevys. But it does look like one.:cool:
Don
It could be for a cheby, the car was loaded with extra parts. I got a total of 10 pistons that were in the trunk. So I think they were either using it for storage or planning on putting in an old chevy engine.
And what is a skim adjuster used for? and what exactly is it? I tried to google it and found nothing.
Sorry Tim. I was trying to joke around with "Corvette64" about his "marzelvane" answer (which I thought was pretty funny). I don't recognize the part, but it looks like some kind of support. You might look the car over real close from top to bottom, especially in the trunk and engine compartment, to see if it looks like it fits anywhere. The rubber pad looks like something might rest against it. I've spent most of my time climbing over Chevys, and I can't say it looks like anything I've seen before.Quote:
Originally Posted by joker51
OK thanks, I kind of thought that. But with old cars I was not sure. As I posted above it might not even be for this car as there were alot of extra parts stored in it. But I might just post it on ebay without knowing what it is, as if someone needs it they will know what it is.
Yeah, sorry Tim. We wuz just having some fun with ya. It is some sort of bracket, but who knows what it could be for.
There is a category on Ebay for "unkown" items. Maybe try listing it in there.
Don
Thanks again guys, As I have said before I am new to the old vehicles. so I believe almost anything you guys will say about them. :D
That is a front motor mount for a six cyl engine. The rubber piece has a hole in it? That bolts to the front of the engine just under the water pump! The other holes bolt to each side of the frame. If the rubber piece is pulled apart then the mount is no good unless a new different rubber can be attached to the frame of the mount.
Thanks, I just looked closer at it and noticed the mount on top (the rubber) is the same as a picture I found when searching for a flathead motor mount.
Chevydrivin, thanks for helping out