Looking under my 29 Ford roadster (for an unknown reason) I saw that my panard bar bolts at the 3rd member connection had come out. My panard bar bolts to the frame bracket on the right side then crosses over the drive shaft and bolts to the rearend housing. Looking at the proper installation posted by TCI I see that this bar is suppose to be mounted on the left side frame rail and then bolt to the same side of the rearend versus crossing over. My rear end is also about 1" farther to the left then the right. Sorry for being winded, but can I leave the panard bar as it is, reconnect it where it came loose and adjust the panard bar to move the rear end to center? Thanks for any help.

Jim Groves