All, I recently purchased a Dual-Reservoir Master cylinder from "Total Performance Inc." (BS-1531 1" piston bore) The tech guy at TP suggested that I use the "Tight Fit Master cylinder fittings for ease of installation" The issue I now have is that they leak brake fluid after sitting overnight. Have any of you used these fittings and encountered the same issue. The good old tech guy said they have never heard of this problem and that they have sold thousands of these fittings.

They are unable to give me a toqure spec or any consistant direction on the installation. One tells me to use teflon tap to stop the leak while another tells me to never use teflon tape.

Any help would be appreicated.

jc

===========================================================
"New tight fit master cylinder fittings are designed for limited space issue problems. Will work on any GM or Ford master cylinder with 1/2-20 and 9/16-18 thread sizes. Great for additional clearance to crossmembers, transmissions and exhaust systems. These straight thread, 90 degree fittings only require the O-Ring washer to orientate the -4 AN fitting into the angle alignment desired."

http://www.tperformance.com/street_r...nder_fittings/
===========================================================