i found a complete rear its out of a 69 stang, i removed the axles , do the backing plates fit over the axle bearing,or do i have to press the bearing off to get the backing plate off, i dont want to try to force it off ,never did a ford rear before
Printable View
i found a complete rear its out of a 69 stang, i removed the axles , do the backing plates fit over the axle bearing,or do i have to press the bearing off to get the backing plate off, i dont want to try to force it off ,never did a ford rear before
the backing plates should fall off .. they are held on by the same bolts that hold the axels on .. and ive never seen a 69 with an 8 inch rear ..
thats what it came out off ,not saying its the original ...dont know..
thebacking plates aint falling off,ill try again tomarrow
post a pic if you can .. if you can get all the bolts out of the chunk with a socket it is a 8 inch .. if it takes a boxed end wrench to get out a couple the it is a 9 inch
i wii if i cant get it ,tomarrow
wait a while, more '69s will pop up that have 8 inchers