Hybrid View
-
01-04-2009 03:30 PM #1
31 ford TCI custom IFS Manual to Power rack
Beautiful setup,as far as looks.I am having a problem with road feel,It is to much for me and my Mom who I want to be able to drive the car,I understand that some prefer manual to power just for that reason.,Do you all have a cure for this,It is scary for me even when driving at hwy. speed and hit whatever bump etc..and the steering wheel if not controlled will take off, Is this common of manual steering? if so and I think not.. give me POWERLast edited by Dq383500; 01-06-2009 at 05:05 PM. Reason: Either no intrest, or improper wording my part, ill just figure it out on my own. Manf. has been no help
-
01-07-2009 11:56 AM #2
I doubt if that is common as I have never heard anyone speak of it before. Personally only found that on dump trucks and it is a bitch .
Do you have lower A arm supports ?
-
01-07-2009 12:51 PM #3
"and the steering wheel if not controlled will take off, Is this common of manual steering?"
No, but it's quite common on systems with bump steer.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
01-07-2009 12:56 PM #4
I'd be checking the camber on the front end.
I had the same problem with my old ford, the
camber was not right and there was no adjustment
for the camber so they had to bend the front axles.
after that the problem was solved, it stoped taking
off on me, and settled right down.
No more problems with it after that. KurtLast edited by vara4; 01-07-2009 at 01:03 PM.
-
01-10-2009 03:52 PM #5
-
01-10-2009 04:39 PM #6
As Tech said, sounds like a bump steer issue....if not, probably have some alignment issues, what was the caster/camber/toe-in set at????Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
01-11-2009 08:12 AM #7
Thanks tech , Vara, Dave, you guys are a great help and support, Ill be home in a couple days and see what I can do about this. I dont have the alignment sheet with me but believe the caster was 2* degrees pos./camber/Toe I cant remember.Brian
Just in case......Happy Birthday Richard. .
Happy Birthday techinspector1