Thanks to you guys and some suggestions I have found out why my rearend in my 32 is about 1/2 inch more to the drivers side. The rear end and front end have been alligned by the shop. We found out the body inner wheel well is about a 1/4 inch to the drivers side and then the rearend is about 1/4" longer on the drivers side. This I get the 1/2 inch off. No biggy!

Question is- I am ordering my wheels and will probably buy them both with the same wheel offset of 4.5 inches. I assume I will be find with adding a 1/4 or 1/2 inch wheel spacer on the passenger side to equal things out? My current wheel lugs are 1 1/4 inches long so I should have enough lug with the spacer. Right?

Just wondering since I have never used wheel spacers in my life. Wanted to make sure they are good to go for 1/4 to 1/2 inches.

Thanks,