Thread: hey firebird77clone

Tweet

firebird 77 clone .here is what i made .all of the top part of this machine i built .this is the old tobin arp seat and guid machine one of the best ever made . it is still made by sunnen they redid it abit but not to much. i pick the machine up with the top part running with a 3/8 drill someone blew the gear box out of it . you can not buy part for the old gear box. but sunnen would sell something very close to what i did to this machine for about $10.000 + a good used machine sells for 15000 and up so other then it abit low on power of forming a 4 angle 2.4000 valve seats it is very good on small stuff . all shafts are running on new bearing i just built the shaft and bearing block .this was the only way i knew how to show you was to post it up here . the frequency drive said it is good for 2 hp and i think it wired for 3 phase the guy i pick this stuff up from wired it in . so i do not think it 220. many of my machines in the shop are 3 phase THANKS