Thread: Phosphoric Acid in radiator?
-
09-27-2009 05:51 PM #1
Phosphoric Acid in radiator?
I have been playing with this stuffbut while researching it I see you could put in your radiator to clean out the rust. Has anyone tried this?
Friends dont let friends drive fords!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-28-2009 04:55 AM #2
Might be hard on water pump seals, heater valves, and composite gaskets.
-
09-28-2009 07:17 AM #3
Don't know the boiling point and how it changes under pressure, but it's used in food processing so it should be safe for seals, valves, etc.
-
09-28-2009 08:59 AM #4
Flush the radiator. add your phosphoric acid and fill radiator with water and run till hot.Drain and flush.Add 1/2 box of baking soda,fill radiator and run till hot,drain & flush,refill with 50/50 antifreeze and water.
-
09-30-2009 08:08 PM #5
White vinegar is supposed to be a very good cleaner for rust and crud. Fill with the vinegar, run it a couple of days and drain. Flush good with water.
Ditto on the model kits! My best were lost when the Hobby Shop burned under suspicious circumstances....
How did you get hooked on cars?