hey guys, I'm hoping I can get some good input here. Working on a 1970 Chevy Nova, unibody car ya know. Okay, bought the car and the roll cage looked pretty good. but what do I know right. So a hotrod buddy of ours got under there and said hey man, this ain't right, you need to reinforce this or you're gonna twist it all up.

I'm gonna put a bunch of pics. basically they cut into the frame middle of the body, welded the cage in there. everything in the back is tube, the cage comes around, goes to the back, the shocks are hung from it, the four link is welded to it. it is all tube.

My question is this, Chris Alston sells a "battlecruiser" frame section for the back that supposedly will weld in (this is talking to them mind you, I can't find the right stuff on their site) to the frame rails under the floor, come back and finish the whole thing off. attach my rear end to their 4 link, supposedly be good to go. I want to know if I can use the roll cage I have with this rear frame section.

Thanks guys