Printable View
I believe that I have seen a heater hose offered that has a short tight 90 degree bend with maybe 6" on one leg, and three to four feet on the other leg, basically a four foot piece of black 5/8" hose with a tight formed 90 at one end. Anyone know of the supplier?
napa 10078
Jerry,Quote:
Originally Posted by jerry clayton
NAPA On-Line says that one is a conversion hose, 0.625" and 0.75. http://www.napaonline.com/Search/Det...078_0158769739
Do you know if the 3/4" piece is short enough that it can be cut off to have 5/8" connections on both ends?
the 3/4 part is the very end 1 1/2 of the about 5 in ninty--other end has a short 90 and hose is 5/8 everywhere but the one little bit
Thanks for the NAPA tip. I went to see my local guy, and they can get the 90 bend hoses in either 5/8", 3/4" or adapter with 5/8 hose, and the short 90 sized 3/4 as you say. For my 5/8" hose, 4" one end they have the long end ranging from 12" up to 60" in 6" increments up to 24", then 12" increments up to 60". Just what the doctor ordered!! They also have them with the short ends stepped longer, too. Good to know! Thanks again.Quote:
Originally Posted by jerry clayton
thats one of those part numbers you need to write on the garage wall next to the phone
63-67 Corvette had hoses like that.