I usually don't bite on those TV infomercials, but I just saw one that caught my attention. It is for this saw:

http://www.dualsaw.com/

The part that I was interested in was where they cut a car in half with it, and it didn't seem to take much effort. I am going to be starting on my rpu project in the next week or so and I have been trying to figure a good way to take about a 3 foot x 1 inch pie shaped slice out of the 2 x 4 x 3/16 tubing for the frame. I want to taper it from 4 inches to 3 inches for the front, and my choices were our plasma cutter, the bandsaw, or a cutoff wheel. This dual blade saw looks like I can put a straight edge clamped to the tubing and make a pretty straight cut.

Has anyone used this exact saw? I think my Son Dan bought a similar product from Sears a while back and had to return it because it didn't do the things he thought it would, but I hope this one is different. I should have it in a week or so and will post my findings when I try it out.

BTW, it was on sale for $ 199.00 and replacement blades are $ 39.00 a set.

Don