S10 V8 swap

Quote:

---

Originally Posted by Bigbzc

Well Gary, you just talked me into keeping the TBI in the 93, but I think my friend is still gonna want to go carb in his 88 Blazer. If so we will definately have to race and compare mpg and such. Actually, I might push him in the direction of the carb so I can get some cheap V8 parts.

What about injectors? I've heard that if you use the 4.3 units that it will run lean and was just thinking about putting some Venom injectors in it (which oddly are the same part # between the V6 and 8)

---

We have used 65lb cop car injectors lifted on 350's and they do work fairly well.I wanted to warn you about the older Edelbrock systems sold on E-bay.The 3500 series is no longer supported by Edelbrock and programing on what might look like a good buy could become a problem.Edelbrock does have a forum with some decent info to surf and learn from over the coming months while you wait to do your swap.

Actually if my friend sticks with the carb route, he has a distributor I can get as well as headers. I already have an intake I bought a year or so ago when I first started this plan. At first, I had a 305HP but it had pits in the cylinder walls so I desided it wasn't worth it. I keep the heads and was thinking of putting them on a 350 block. All I really need right now is a block and crank. (and injectors, ecu) I already have some flat top pistons, bearings, ect sitting around waiting for a home.