Thread: trouble shooting a fuel gauge
Results 1 to 9 of 9
LinkBack URL
About LinkBacksThreaded View
-
10-19-2012 05:34 AM #1
Moderator
- Join Date
- Apr 2001
- Location
- St Cloud
- Car Year, Make, Model: 48 GMC trk & a 66 Rolls Royce
- Posts
- 532
trouble shooting a fuel gauge
I installed a Autometer(0 to 90 ohm) sending unit in my poly gas tank. I ran 2 wires(one from the sending unit terminal & one from the sending unit ground) to the gauge. There is also a hot wire from ign to gauge.
The gauge reads below empty....if I put second wire from the sending unit ground to frame It reads above full.
The resistance between the 2 sending unit terminals reads 60 ohms.
What now.....Bad gauge? everything is new.
DonLast edited by Don Meyer; 10-19-2012 at 05:37 AM.
Don Meyer, PhD-Mech Engr(48 GMC Trk/chopped/cab extended/caddy fins & a GM converted Rolls Royce Silver Shadow).
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Friday and Saturday (4/11 & 12/25) Chris (my wife) and I made the journey to Homestead-Miami Speedway so I could participate in the Florida Power & Light sponsored Electrathon event.:cool: It was...
Electrathon - A Different Kind of...