
Thread: 46 Lincoln shock repair
Hybrid View
-
10-05-2017 11:57 AM #1
46 Lincoln shock repair
Today I had a 46 Lincoln on my lift. I was repairing the upper mount on passenger side rear. The whole undercarriage is custom. The welds looked like kaka but they've held for 25 years so I guess they're OK.
Anyway. It was a tough spot. I cut off part of the old bracket, welded it back together, and reinforced it with some 1/4" plate.
It's interesting to come behind someone's work. 25 years certainly reveals what was done right, and what wasn't..
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
10-05-2017 02:01 PM #2
46 Lincoln...... and no pics!
With a custom frame or suspension?? And still no pics! Sheesh!
-
10-05-2017 06:47 PM #3
- Join Date
- Apr 2011
- Location
- Prairie City
- Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
- Posts
- 7,298
- Blog Entries
- 1
No pics? Shoot just email them to mike if you can't load them on here.Ryan
1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
Tire Sizes
-
10-06-2017 07:23 AM #4
-
10-05-2017 07:51 PM #5
*SIGH*
Pics next time, I promise.
But I'll reiterate: the welds look BAD. There is not much about this build you want to see.
The fuel lines are all rubber tubing. Need to be redone with steel.
The wiring was patched, not completely replaced.
There is a BIG paint bubble on the rear trunk which is result of complete shoddy workmanship: there is a repair plate pop riveted behind it.
Good news on that is he is going to have me fix it right.
Bad news is the ankle bone.
It's connected to the shin bone.. Shin bone is connected to the knee bone...
I may require that he allow me to replace the entire lower trunk opening - the lower seal channel and rust areas to both sides. But I don't do finish work.
I like to work with steel. I'll let someone else do the plastic (body filler)..
Education is expensive. Keep that in mind, and you'll never be terribly upset when a project goes awry.
EG
-
10-05-2017 08:15 PM #6
The welds looked like kakaSeth
God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis
-
10-06-2017 07:20 AM #7
Here in my neck of the woods it's pronounced, Cah Cah....
I can't remember a singular event that triggered this nuttiness so I'll say it was being born. After we moved from Kansas to Chicago (I was 5 then) we'd drive back down each summer to visit the...
How did you get hooked on cars?