Thread: quadrajet rebuild
Hybrid View
-
07-14-2004 01:06 AM #1
quadrajet rebuild
Just rebuilt the quadrajet carb for my jeep, # 17056528 Question...the secondary lockout lever...what exactly is this for? and when I go to open the throttle all the way it wil only let the secondaries open partially. I know that is what it is supposed to do, but what controls the stop so that it will open all the way? The choke lever does not move it, and the actual lever that stops the lockout from opening all the way doesn't seem to have anything to move it. I hope this is not to confusing, but I can take a pic and attach it to the thread if it helps..thanks..Paul
-
07-14-2004 06:43 AM #2
I thought it was the backwash of fuel that pushed it open, kinda like a reverse tidal wave.
No- it's Vacuum....Jim
-
07-15-2004 03:08 AM #3
How does the vacuum move the secondary lockout lever? If I manually move the fast idle cam lever I can get it open. There is nothing hooked up to the fast idle cam lever, it is free floating on the same shaft as the choke lever. Pictures coming.
-
07-15-2004 03:40 AM #4
I thought that it was to prevent the secondaries from opening, until the choke is completely off. Vacuum pulls the secondary air doors open, on top of carb. The secondary throttle blades will open, whether the doors open or not, if the choke is all the way off.
To adjust the door, there is a little screw and spring where the door is hinged, passenger side.
Last edited by poncho62; 07-15-2004 at 03:42 AM.
My grandfather, mom's side, drove a 39 Plymouth coupe when I was about 4 or 5 and I thought it was pretty cool and I loved the tail fins on the 49 Cadillac. I drew cars when I was in the 5th and 6th...
How did you get hooked on cars?