Does anyone have a 1960 Chevy C-10 pick-up with a V-8 set up?
I need pictures of the motor mounts and brackets, if you have them.
Printable View
Does anyone have a 1960 Chevy C-10 pick-up with a V-8 set up?
I need pictures of the motor mounts and brackets, if you have them.
I,ve got a 65 C10 they should be the same give me a little bit of time I need charge my battres for my camera and I will post them
heres pic of my mounts
right side
close ups
r side close up
real close up
right side real close up
as you can see I do use this truck as a driver for give the dirt :D
left side of motor
Okay last pic of center of motor hope this help 1960 to 1966 will use the same motor mounts
Thanks for all the pics John. Great looking engine too! The brackets on your frame are just like what is in the 1960 C-10, but your motor mounts are located in a different position on the block than what is on the 1975 350 V-8 that I have. Yours look to be more toward the front. I'll have to look at the mount location on on mine again to be sure. Did you have to change anything on yours, or was that the original engine in 1965, minus all of the hard work and chrome?
every thing is stock except the motor it had a 327 in it at frist that motor was junk I put a 71 chevell 350 in it place i am getting ready stuff a big block in thereQuote:
Originally posted by J.D. Burke
Thanks for all the pics John. Great looking engine too! The brackets on your frame are just like what is in the 1960 C-10, but your motor mounts are located in a different position on the block than what is on the 1975 350 V-8 that I have. Yours look to be more toward the front. I'll have to look at the mount location on on mine again to be sure. Did you have to change anything on yours, or was that the original engine in 1965, minus all of the hard work and chrome?