hey looks good by the way can you flip the alt bracket so it closer to the water pump if so i bet you could sell a bunch of them or at least one :) been some time was thinking at last ride may he done you in :)
Printable View
hey looks good by the way can you flip the alt bracket so it closer to the water pump if so i bet you could sell a bunch of them or at least one :) been some time was thinking at last ride may he done you in :)
Neat stuff Mark, I especially like the engine brackets!
Hi Pat, Hi Dave,
The alt bracket was designed to keep it low on the engine so it will clear the passenger side floor and engine cover. I looked at pulling it in closer to the engine but, if it was any closer, then you start running into the lower water pump outlet. I couldn't pull it up because of the mounting bracket itself.
Thanks
Mark
yes i know you need it to work the way you have it but i was looking at the bracket to work closer to the water pump . more close to the top of the head next to the upper part of pump .if you had the print i could have it cut out for my use or i just lay one out like i have with cardboad :)Quote:
Originally Posted by astroracer
This thing is killer, Mark! I'm doing everything I can to not go on Craigslist and find an Astro and a big block!
Let me look at the bracket tonight. It may work if it is turned upside down with the adjuster at the top. It will probably be real close to the pump outlet but it may fit. If it does I may run it like that.
If it works like that, and you can use it as is, I can have a set laser cut for you. :)
Mark
please do not go to far out of you way on it. but if it would fit i would have a use for one ThanksQuote:
Originally Posted by astroracer
Not a problem Bud, you know that... I will check it out tonight and, if I need to do any tweaks to the CAD model, I can do that this weekend and probably have them cut next week. I was just out talking to my laser guy and they aren't real busy so it shouldn't be an issue. He has some other parts to do for me so this will get him in gear. :)
Besides, this will give me a good excuse to come up for a visit.
Do it!!!! I feel so alone....Quote:
Originally Posted by falconvan
Finding the Astro would easy and the BBC even easier.... I have a couple for and you know Mr. McCarthy can supply you with anything you need...
And thank you for the kudo's, I'm glad you like the van. :)
It sure looks like it would work fliped over. Good easy design MORE nice work
That's what I'm thinking Charlie. Even if it only needs a little work it will make for a more compact package. That's what I need as well as Pat so, if anyone else can use it, I'll see what I can do to accomodate.Quote:
Originally Posted by cffisher
Mark
Very nice work, Mark. The brackets are a clean, attractive design, and most of all designed for function first, appearance second. Some of the vendors out there could take lessons....
Thing is they mightQuote:
Originally Posted by rspears
Thanks Roger! Appreciate that!
I redesigned the brackets tonight to help Pat out AND get the alternator tucked in a little better.
I took the brackets off tonight and turned them upside down like we talked about. This actually pushed the alt out a bit more so I did some measuring and decided to move the whole bracket down two inches on the line between the cylinder head mounting holes. This will tuck the alternator down and inward toward the lower pump outlet.
Here are the new brackets I'll get them cut next week. What do you think Pat? I will verify fitment this weekend but I don't see any issues with the block and this is all well forward of the motor mounts.
http://images107.fotki.com/v71/photo...PHASEII-vi.jpg
Compare the new one to the old one and you can see how far down the alternator will go.
http://images55.fotki.com/v585/photo...RNATOR1-vi.jpg
This also puts the adjuster bracket up on top of the alternator. Much easier to get to with the engine cover off.
Thanks Pat, I think this will be better.
yep the over all on the alt may push it out that.s ok. as my pulleys can be reworked if need . looks good mark . i have a use for one Thanks :)