I have a 1968 Chevlle that some years ago hit the drivers side fender , while backing up on one of those rpond pieces of steel at a gas station. The fender was replaced and that was that. More recently I,ve got involed in restoreing the car. And discovered that the diverside front is about 2 and 1/2 inchs longer than the passgenger side. My son said the frame was bent when hit the pole. But I made a careful inspection of the frame and could not see where anything was bent. Also the bolt holes line up okay for the bumber and shteel metal in the front. And ofcourse the frame on that car is a strong frame. It would take one heck of an impact to bend it. So I don't think the frame is bent. I also check lower and uper control arms, the shalf, busings, ball joints by takeing them apart. Could see no damage. Also the fender and inner fender was off the car, so I could see everything petty good. Is there anyone that may have a sujestion? I am at my wits end. Thanks, John.