1939 Dodge D11 Front Suspension

I have an original '39 Dodge D11 2-door. It is a running, driving original car as is. I want to start to go towards the street rod side. I thought the first step would be to get the front suspension done, as well as the steering, then I can start to mock-up for the engine and tranny. Does anyone know of a company who makes a crossmember for my car that can use a Mustang II suspension? Has anyone ever tried to use a Dakota or Durango front suspension? I don't mind using the Mustang II if that is the best way to go. If not, I want to stick with something Mopar. Help Please!

There was a similar thread about a month ago concerning a '38 touring. You might PM the author of the last post for additional information.

http://www.clubhotrod.com/forums/sho...threadid=17258

Regards, Mark

Heres' another idea. Did it on the 40 Dodge i'm building bought the kits from pyldo dropped chevy spindles and disc brakes and the out side shock mounts all very resonablity priced also bought the rack& pionon kit to put a chevy rack and coluomn in the car havn't put it in yet just got all the parts gathered up will be doing this. Winter when the shows slow down do have some pictures if interested i can post if it will help Bud

Hi, I'm a newby. I have a 1939 Dodge 2-door sedan which I'm rodding. Its motor-vation will be a 241 cube Baby Ram Hemi with a Ford 9-inch rear end. I just want to clear this in my muddled mind. Mr. Bud, are you retaining the original IFS but adding the rack and pinion and disc brakes? Thanks.

Yes i did also pit Chevy Spindles as well Kit comes from Plydo.The Shocks you see in the Pictures Have also been added. Thanks for asking Have Stalled out for a month or so collecting parts and Money But will start back in a couple more Good Luck Bud

Thanks for answering so quickly. Does the Chevy rack and column come from Plydo or a salvage yard?

Here's a picture of my 35 Plymouth coupe hot rod. It has a Ford 302 for motor-vation.

Try Fatman's Fabrications out of Charlotte NC they have M2 frame stubs for 34 - 56 Dodges. www.fatmanfab.com

My M2 in my 34 Plymouth was from Progressive Automotive out of Baltimore Ohio. www.progressiveautomotive.com