Guys

Graham from Perth, Australia (Perth is on the West Coast) here.

I am fitting a Jag series II front end and IRS to my AR-110 International pick up and I am after ideas on the best way to fit the IRS.

I have fitted the front end using the original mounting points but the IRS is a bit harder. I would like to leave the IRS in the cage but the AR-110 chassis is too narrow to make good use of the four IRS cage mounting points.

Is it best to
1. Make a new cage assy to fit the AR-110 chassis
2. Weld crossmembers and plates etc to support the diff centre
3. Make brackets and try to use the existing cage mounting points

I have attached a jpg showing the relationship between the cage mounting points and the chassis.

All ideas and comments are appreciated

Graham