Printable View
I bought a mmll crossmember and when it got here I found this. The upper part where the a-arm goes not to bad but, the lower part scares me. Can I
make this work by running some weld over the pitting or maybe gussets to make it stronger? Thanks.
I hope the pix show up a couple of post down.
I'd look, but I really don't want to sign up with msn com to do so. If you'll post a photo in the thread, I'll take a look.
I also cant get the pics to come up unless you sign up.
sorry, i will try and figure out a way to post pix.
I wouldn't worry too much about the pitting,other than you may need to arc weld it with 6011 rod to burn through the rust. Hank
Thanks for the reply. I wasn't sure if I needed to cut out the bad part and replace the metal or just weld over the pits or if it is even worth fixing.