Thread: What combo will get me 650 HP out of 502?

Tweet

I recently bought a 502 bare block. No pistons, no crank, nothing but the empty block. I want to achieve 650 with a Pro charger super charger. I want to know what combo will get me to my desired 650 hp... what pistons,c crank, rings, rods? What combo of parts will make 650 hp? Anyone..anyone??
This motor will go into my '72 Nova

Call Procharger and have them recommend a combination of parts. You'll get it right the first time with no guesswork.
http://www.procharger.com/systems.shtml

if you do not have a crank or pistons why not bore it to 4.500 and stroke to 4.250 4340 crank use a .250 longer rod h beam s .use srp.s pistons. flat tops. rings i would use are je rings .cam roller mechanical 685/685 269/276 on lobe sep 114 bearings federals 3/4 mains races bearings. the fed s keep the oil flim when increased load capacity this would be a540 and make 650 with out a blower and with 800+ heads gm rect ports 990.this is very close to what i have in my 50 chevy coup street car and it is fast fast fast if you do not like braking tires loose at 110 do not build it you will need bf goodrich radials and put a ford 9 inch and a good 400 trans you will need it .and msd 6btm box put a drive shaft loop in it this would 9 to1 so you will not need much boost run 110 fuel