Thread: electronic distributor
-
09-20-2003 06:47 AM #1
electronic distributor
I have recently fitted a 454 big block in place of a 327 small block.My small block had points style distributor and the big block has a electronic distributor.I have fitted a electronic style coil but was stumped on why there was two wires on the distributor one black one purple,I realize one goes to positive coil but the other ? If anyone has any advice to offer please feel free.
Much appreciated
pauly
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-20-2003 07:26 AM #2
get an early model electronic distributor from small block . the later models are for the computer type carburators and transmisions. with the older style (1) wire which is a hot igniction wire is all you will need .it has room for a second wire but that is where you connect a tach if ya choose. hope this helps yamichael n mississippi
You're welcome Mike, glad it worked out for you. Roger, it's taken a few years but my inventory of excess parts has shrunk a fair bit from 1 1/2 garage stalls to about an eight by eight space. ...
1968 Plymouth Valiant 1st Gen HEMI