Thread: Line Hone help!

Tweet

ok ok whatever on the gear set I got it for $10, I do have a roller set if I need it. I got a set of pistons on summit to fill my big 119 CC heads and I wanted to get a good 9.5:1 P/N:TRW-L2328F30 press fit. I think I fucked up it has a Pin Diameter of 0.989 and don’t see rods with that. All I see are rods with .990 are they just rounding up?????

that would be .001 clearance for full floating pins, they should have come with spirolocks or c-clips for the piston pin bore retainer grooves.... Pat is the big block guy, he'll know for sure. If you mic the inside bore of the rod big end and the outside of the pin you would know your clearance for certain.

///////////////////////

Pat you cant even speak english!!!!

Mkubiak, you asked for help, then you insult the ones trying to help you. Everyone does not write perfectly, but I always get what Pat is explaining. He has probably forgotten more stuff than you and I combined will ever know about engines. If you're gonna cop an attitide, there are lots more forums that might want to help you. Most 'new guys' sit back and read for awhile, get to know the people in here. If you took time to do that, you might be better off.