Thread: Is this going to be a problem?
Results 1 to 5 of 5
LinkBack URL
About LinkBacksThreaded View
-
06-02-2007 04:11 PM #1
CHR Member
- Join Date
- Jul 2006
- Location
- Glastonbury
- Posts
- 371
Is this going to be a problem?
Well, I was getting ready to paint the block on my 454. As I was taping up the heads around the intake, I noticed the cross over heat riser ports are exposed on the heads...The intake doesn't cover them.
Is this a problem? Are these under pressure? I believe they are tied into the exhaust ports somehow. I think my intake gaskets will cover these up...
See these pics...with intake in place:
http://img66.imageshack.us/img66/7208/heatriser1vd9.jpg
http://img66.imageshack.us/img66/4818/heatriser2lc7.jpg
Some pics..without the intake:
http://img91.imageshack.us/img91/1062/454head1xm8.jpg
http://img91.imageshack.us/img91/4971/454head2gy1.jpg
I beleive this is the correct intake for the motor. Its a Edelbrock Performer 2.0 dual plane. The motor is 454 out of '84 c3o wrecker.Last edited by Gusaroo; 06-02-2007 at 04:16 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
You're welcome Mike, glad it worked out for you. Roger, it's taken a few years but my inventory of excess parts has shrunk a fair bit from 1 1/2 garage stalls to about an eight by eight space. ...
1968 Plymouth Valiant 1st Gen HEMI