Thread: Break In Roller?

Tweet

Hi folks I got a big trouble in my head. I've understood teh roller cams need no break in but few days ago I've seen comp cams in its instuccions talks about the break in and in a TRUCKIN article says the samehttp://www.truckinweb.com/tech/engin...uck/index.html
The question is needs the roller cam break in or not?

Nope...but I think my monitor needs to be replaced after that large font.

Thanks Bill!

Nope, just drive it like you stole it.

Don

Dip 'em in motor oil, install and go.

Maybe you're talking about this text from the article:

"Making It Run: The start-up and break-in of the new engine went smoothly."

If that's what's concerning you, dismiss it from your mind. All they mean is that they ran the motor up to make sure everything was happy together internally and to get a little time on the rings/cylinders.

pardon my ignorance I sat next to double d cup carol in geography class didn't learn much but what country is an thanks ted

I do believe that Puerto la Cruz is the name of a northern Venezuelan city (and sea port), in the state of Anzoátegui.

thanks glenn what through me off was when I googled puerto la cruz an google asked did you mean puerto la cruz en but I now think you are correct thanks ....ted

what you want to do this wash out the roller lifters with thinner and blow them dry and then soak them in 40 wt race oil over nigth before sticking them in the engine there is no break in on the lifters but there is on valve spring before you rev the shnit out of it let it get up to running temp and cool down 3 or 4 times at a idle before for you give it hell

thanks friends my doubts are cleared and yes, Puerto la Cruz is an Venezuelan seaside town so currently a litle hard for bringing parts from USA threforeI must be sure about the things I buy. Well in other hand I'm happy to be part of this community GOD BLESS AMERICA

Originally Posted by pat mccarthy

what you want to do this wash out the roller lifters with thinner and blow them dry and then soak them in 40 wt race oil over nigth before sticking them in the engine there is no break in on the lifters but there is on valve spring before you rev the shnit out of it let it get up to running temp and cool down 3 or 4 times at a idle for for you give it hell

Thanks for that really good info Pat, I will save that to my folder of did you know car facts folder.

^^^ yes... thanks Pat... I did not know about the spring break in and I think that cost me a spring this summer after replacing them all after my little lifter mishap... now I know what to do next time.

-Chris

well thanks i am glad you guys think i had some useful info on this subject