Thread: 9 inch ford rear
Results 1 to 8 of 8
LinkBack URL
About LinkBacks-
11-20-2008 10:23 AM #1
CHR Member
- Join Date
- Feb 2007
- Location
- springfield
- Posts
- 383
9 inch ford rear
I have what seems to me an old 9inch ford rear end in my chev
pro street car..In removing the third member I noticed that there
was no actual drain plug...The only plug found was a 3/8 plug
located on the driver side of rear end. Does this sound like an
old case to you? I did drain it by loosing all the bolts. One other
question. I would assume to refill it I will need a sucuction type
gun and fill it until it begins to come out the hole. Am I
right or wrong...any help out there would be much appreciated.
thanks r dobbs
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-20-2008 10:31 AM #2
CHR Member
- Join Date
- Feb 2006
- Location
- Bartlett
- Posts
- 6,831
You can fill it with the squeesable quart containers the lube comes in
You can also put the lube in thru one side before you install the axle
-
11-20-2008 10:58 AM #3
CHR Member
- Join Date
- Sep 2007
- Location
- UPSTATE New York
- Posts
- 4,336
I used a turkey baster to fill mine. It did take a while, and I did get some major grief from my wife.............
but I also didn't spill any(gear oil is the one automotive odor that I cannot stand!!).
Dave W
I am now gone from this forum for now - finally have pulled the plug
-
11-20-2008 11:16 AM #4
CHR Member
- Join Date
- May 2003
- Location
- whittier ca.
- Car Year, Make, Model: 32ford5w,60fordstarliner,55chevy65corvai
- Posts
- 645
just what is it in gear oil that smells so bad you can get it on your t shirt and still smell it no matter how many times you wash it...tedI'LL KEEP MY PROPERTY, MY MONEY, MY FREEDOM, AND MY GUNS, AND YOU CAN KEEP THE CHANGE------ THE PROBLEM WITH LIBERALISM IS SOONER OR LATER YOU RUN OUT OF OTHER PEOPLES MONEY margaret thacher 1984
-
11-20-2008 11:18 AM #5
CHR Member
- Join Date
- Feb 2006
- Location
- Bartlett
- Posts
- 6,831
That is rotten dynosaur smell
-
11-20-2008 12:30 PM #6
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,876
Just to expand for those that might be interested, the sulphur is part of the EP (extreme pressure) additive, known as sulphur-phosphorus, the most common automotive gear lube EP additive. As for viscosity grading, gear oil uses a different numerical spec than engine oil but as far as actual viscosity rating, SAE 90 gear oil and SAE 40 engine oil fall within essentially the same rate of flow.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
11-20-2008 01:39 PM #7
CHR Member/Contributor
- Join Date
- Apr 2005
- Location
- bay city
- Posts
- 10,546
i like the smell of gear oil
Originally Posted by jerry clayton
when it smells really bad is when someone took out a stern drive gear set. you pop the upper bearing cap off the stern drive and that would make you blow chunks
Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
-
11-20-2008 03:41 PM #8
CHR Member
- Join Date
- Oct 2003
- Location
- ST.LOUIS
- Car Year, Make, Model: 31 FORD 5 WINDOW,69 442, 305 sprint car,
- Posts
- 1,410
The new cars using factory synthectic gear oils are the worst, I wanta puke every time we service one of em.....
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Ok gang. It's been awhile. With everything that was going on taking care of my mom's affairs and making a few needed mods to the Healey, it was June before anything really got rolling on this...
My Little Red Muscle Truck