Thanks a mil guys. You are awesome. Richard you are so right that there are very few forums now days that are actually helpful. What started out as a hobby for my son and I has quickly turned into a passion and there is no better time spent than tinkering around a garage with your son. It is guys like you that allow newbies like us to continue the passion and not give up.

Our vehicle is going to be an off road rock crawler. We are building a tube chassis based on the hell raiser 3 plans from azrockcrawler dot com This will be a completely off road vehicle due to the tube chassis

We currently have the stock cast iron heads but are going to replace them with aluminium heads. Any suggestions?

This will not be a quick and dirty rebuild. We are wanting to get 700 horsepower, fuel mileage is not important. We have a Holley 750 CFM Deamon carb

We have 44 inch super swampers with a 14 bolt corporate military rear axle with 4:10 gears and a Dana 60 front axle. We have a NP 205 transfer case and a Turbo 350R transmission

One additional item we do need suggestions on is the setup people typically use to run the engine standalone

Once again thanks guys for all your help. It is great to know there are still good people out there

Happy New year to everyone