-
05-13-2004 05:23 PM #1
454/468 Engine Buildup Help Needed! =)
I'm thinkin about buying an 86 IROC Z to make a street driven torque monster, I can run up to 12-1 C/R Or so, and I really wanna use stock 454 heads and just port,polish and install new valves, which heads flow better? what would be a good cam choice, 2500+ RPM range is fine, I want a real rough idle, prolly gonna run possibly a M-22, T-56 or a T-10, dont know yet, 12 bolt rear eaton posi 4.11+ Gears (possible Tub Later on), major frame mods of course, anyone know a combo that fits this? Thanks Alot!
~Chris
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance