Thread: 327 build up questions.

Tweet

im taking my time abd building a 327. so far i have the machine work done and arp bolts, kieth black pistons, 11:1. flex plate, and harmonic balancer. i want to use a mechanical roller crane cam, in the 4200 to 8000 rpm range with duration of intake260/268exhaust and lift of intake .670/.625exhaust. roller lifters and rockers too of course. just looking for suggestions on heads and intake and carb if anyone has any.and any other suggestions are always welcome too.

for haeds look for 200cc runners and 2.05-2.08 intake valves....intake single plain Torquer II

When buying the heads make sure you opt for the ones the piston were designed for? 67cc or 76cc chambers...

200cc Dart pro-1, Victor Jr intake, Holley 800dp

I dont know how anyone can give You any help before we know everything about what the motor is going in and what the intended use is???

I pretty much assume the guys got all that figured out. I am not trying to build the whole car for him. He just asked for heads,Intake and carb. for a paticular rpm range, cam and cid.

there is no donor car yet, but it will be street/strip eventually.