Thread: heads or intake problem.
Results 1 to 7 of 7
LinkBack URL
About LinkBacksHybrid View
-
07-25-2005 04:37 AM #1
CHR Member
- Join Date
- Jan 2005
- Location
- Muskegon
- Posts
- 26
well the intake is the same as the edelbrock air gap but the problem sits between the intake and the heads. i was recently told the block could be decked and it may have thrown it off. i dont know. it seems like a thicker intake gasket would solve it, is there such a thing? and some of the bolt holes dont line up perfectly, they are a touch off. this intake is for stardard heads not voertec. ill check the stock intake later today and see how it sits.. thanks everyone.Last edited by Arrythmic_mike; 07-25-2005 at 04:40 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Several years ago we did quite a good trip of USA, and on our trip we got to meet Mike and Christine Frade. We didn't stay long with them, but in that relatively short time we both gained a great...
We Lost a Good One