Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: heads or intake problem.
          
   
   

Results 1 to 7 of 7

Threaded View

  1. 07-25-2005 04:37 AM #6
    Arrythmic_mike's Avatar
    Arrythmic_mike
    Arrythmic_mike is offline CHR Member
    Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Muskegon
    Posts
    26

    well the intake is the same as the edelbrock air gap but the problem sits between the intake and the heads. i was recently told the block could be decked and it may have thrown it off. i dont know. it seems like a thicker intake gasket would solve it, is there such a thing? and some of the bolt holes dont line up perfectly, they are a touch off. this intake is for stardard heads not voertec. ill check the stock intake later today and see how it sits.. thanks everyone.
    Last edited by Arrythmic_mike; 07-25-2005 at 04:40 AM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink