Thread: Trick Flow Top End kits
-
10-15-2005 05:21 PM #1
Trick Flow Top End kits
has any one used these. I have posted before about my motor problems and the guy that built it. I am thinking about going with this http://store.summitracing.com/defaul...4294858290+429 4908216+4294925067+4294840140+4294858202+309688&autoview=sku
Instead of the vortec heads and lunati cam i was thinking about swapping. Keep in mind I want this to be a street motor so is this a good kit or not. Will I have to get a new stall converter or can I use the factory Stall.
Thanks
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
10-15-2005 05:32 PM #2
Re: Trick Flow Top End kits
Originally posted by 1bad75vette
has any one used these. I have posted before about my motor problems and the guy that built it. I am thinking about going with this http://store.summitracing.com/defaul...4294858290+429 4908216+4294925067+4294840140+4294858202+309688&autoview=sku
Instead of the vortec heads and lunati cam i was thinking about swapping. Keep in mind I want this to be a street motor so is this a good kit or not. Will I have to get a new stall converter or can I use the factory Stall.
Thanks
-
10-15-2005 09:12 PM #3
You still haven't addressed the compression ratio problem. You have too much c.r. for this cam.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance