Thread: how much might this engine run me

Tweet

i was wondering how much this combo might cost me?

Displacement: 383 cu. in. Carburetor: Barry Grant Silver Claw 750 Heads: Air Flow Research 190, with 2.02/1.60 in. valves, 190 cc intake runners, CNC porting, and extra hand-porting Intake: Edelbrock Performer RPM Camshaft: Comp Cams hydraulic roller, with 235/242° of duration @ 0.050 in. of lift, and 0.555/0.576 in. of lift (Corrected valve lift with 1.6:1 rockers is 0.592/0.614 in.) Rockers: Comp Cams 1.6:1 Pistons: TRW forged Rods: Lunati 5.7 in. Crank: Scat 8060 cast Timing: 36° Comp. Ratio: 9.4:1 MAX HP: 525 @ 5800 MAX Torque: 535 @ 4200

Originally posted by speedvega
i was wondering how much this combo might cost me?

Displacement: 383 cu. in. Carburetor: Barry Grant Silver Claw 750 Heads: Air Flow Research 190, with 2.02/1.60 in. valves, 190 cc intake runners, CNC porting, and extra hand-porting Intake: Edelbrock Performer RPM Camshaft: Comp Cams hydraulic roller, with 235/242° of duration @ 0.050 in. of lift, and 0.555/0.576 in. of lift (Corrected valve lift with 1.6:1 rockers is 0.592/0.614 in.) Rockers: Comp Cams 1.6:1 Pistons: TRW forged Rods: Lunati 5.7 in. Crank: Scat 8060 cast Timing: 36° Comp. Ratio: 9.4:1 MAX HP: 525 @ 5800 MAX Torque: 535 @ 4200

THAT DEPENDS ON HOW MUCH WORK YOU ARE WILLING TO DO YOURSELF.IN MY SHOP AN ENGINE LIKE THIS WOULD SET YOU BACK AROUND $7,500 TO 7,800.YOUR COMBO IS VERY CLOSE. THE ONLY THING I CAN SEE IS THE HEADS MIGHT BE A LITTLE BIG WITH THE EXTRA CNC WORK DONE TO THEM BUT THEY WOULD STILL WORK.YOU MIGHT BE BETTER OFF WITH A 180 CC HEAD WITH BOWL PORTING AND A GASKET MATCH.