-
11-26-2005 08:44 AM #1
fuel pump
not really a hot rod question. but I'm looking at helping someone put a pump in a 97 S-10 Blazer. Anyone ever do this? how big of a pain is it? What all needs to be done as far as removing major parts of the vehicle?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-26-2005 10:25 AM #2
i would but the library is closed now, I'm leaving in two hours to work on it and I refuse to buy a book for a job I'm not even going to get paid for. I told them they'd be less headaches ahead by taking it somewhere versus doing it ourselves in a driveway. Especially if it's 4wd it seems anything 4wd sucks. I don't know if the tank is in the back and rear end has to come down like my firebird. or if it's completely in the back and will clear the differential. or if it's in the middle like some dodges and have to drop everything from the transfer case back.
-
11-26-2005 10:34 AM #3
you'll need more money than time. drop the gas tank and remove the pump its not that bad, but a new pump is about 300.00 its under the truck mid. way left hand side. on a 2 wheel drive you have to drop the driveshaft.Last edited by lt1s10; 11-26-2005 at 10:38 AM.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
11-26-2005 10:55 AM #4
thank you very much. they already have the pump. so maybe it'll be a not so bad job after all. Sometime this winter I'm looking at replacing the sending unit in my firebird and been reading up on that and getting ready for it. Not something I'm looking forward to, thanks a lot
-
11-26-2005 06:14 PM #5
wasn't so bad. biggest thing was getting the filler tube broke loose. We didn't get to finish it. the nipple on whatever that thing is at the left front of the tank broke off when the take fell. So tomorrow we'll replace that doohickey and put it back up.
-
11-26-2005 06:22 PM #6
Originally posted by firebird45331
wasn't so bad. biggest thing was getting the filler tube broke loose. We didn't get to finish it. the nipple on whatever that thing is at the left front of the tank broke off when the take fell. So tomorrow we'll replace that doohickey and put it back up.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
11-26-2005 06:34 PM #7
without the doohickey connect to the vent line what happens?
-
11-26-2005 06:48 PM #8
Originally posted by firebird45331
without the doohickey connect to the vent line what happens?Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
And a Happy Birthday Wish for Mr. Spears. Hope you can have a great one. :)
A little bird